Study on LiFe<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Sm<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>PO<Subscript>4</Subscript>/C used as cathode materials for lithium-ion batteries with low Sm component

LiFe_1???x Sm _x PO₄/C cathode materials were synthesized though a facile hydrothermal method. Compared with high-temperature solid-phase sintering, the method can allow for the fabrication of low Sm content (2 %), a scarce and expensive rare earth element, while the presence of an optimized carbon coating with large amount of sp²-type carbon sharply increases the material’s electrochemical performance. The high-rate dischargeability at 5 C, as well as the exchange current density, can be increased by 21 and 86 %, respectively, which were attributed to the fine size and the large cell parameter a/c as much. It should be pointed out that the a/c value will be increased for the LiFePO₄ Sm-doped papered by both of the two methods, while the mechanism is different: The value c is increased for the front and the value a is decreased for the latter, respectively.     

DDA与FEM耦合法在分缝重力坝非线性分析中的应用

混凝土重力坝一般设有数条纵缝。纵缝使坝体的连续性遭到破坏，一般的有限单元法很难处理这样的不连续变形问题。本文首先阐述了DDA(Discontinuous Deformation Analysis)与FEM(Finite Element Method)耦合算法的原理，然后采用作者自行研制的DDA与FEM耦合法程序对一实际重力坝进行了详细的计算分析。重点讨论了纵缝的不同设置形式和缝宽大小对坝体变形和应力分布、坝底面接触应力分布以及坝基面应力分布的影响，为工程设计提供依据。     

BEM for simulation of a 2D elastic body with randomly distributed circular inclusions

Based on our 2D BEM software THBEM2 which can be applied to the simulation of an elastic body with randomly distributed identical circular holes, a scheme of BEM for the simulation of elastic bodies with randomly distributed circular inclusions is proposed. The numerical examples given show that the boundary element method is more accurate and more effective than the finite element method for such a problem. The scheme presented can also be successfully used to estimate the effective elastic properties of composite materials. Project supported by the National Natural Science Foundation of China (No. 19772025).     

颗粒型砂介质的受压力学特征及屈服滑动

提出颗粒型砂介质在压实过程中的两种特征：孔隙填充状态和颗粒滑动状态；针对孔隙填充状态的力学行为特征，提出相对体积改变量(压实量)作为表征此状态的特征参量，研究了瞬时压缩模量与压实量的函数关系；针对型砂的颗粒滑动状态，提出具有强化效应的Mohr-Coulomb屈服条件，推导描述颗粒屈服滑动状态的增量本构方程、以及三轴压实过程条件下的状态本构方程，最后，就不同侧向压力下的三轴压缩试验、带模样的型砂压实试验的大量试验数据进行处理和验证。     

Pertubation solution of non-newtonian fluid axial laminar flow through eccentric annuli

Using the perturbation method, the axial laminar flow of Non-Newtonian fluid through an eccentric annulus is studied in the present paper. The relative eccentricity ε is taken as a perturbation parameter, and the first order perturbation solutions of the problem, such as velocity field, limit velocity and pressure gradient, are all obtained.     

Direct C−H Carbamoylation of Nitrogen-Containing Heterocycles

Nucleophilic radical additions at innately electrophilic C(sp²) centers are perfectly suited for the direct functionalization of heterocycles. Using bench stable and commercially available alkyl oxamate and oxamic acid derivatives in combination with photoredox catalysis, a direct carbamoylation of heterocycles yielding amide functionalized pharmacophores in a single step is reported. The reaction conditions reported are compatible with structurally complex heterocyclic substrates of pharmaceutical interest. Notably, derivatives containing functional groups incompatible with standard amidation reactions, such as carboxylic acids and unprotected amines, were found to be amenable to this reaction paradigm.     

Sparse Multicategory Generalized Distance Weighted Discrimination in Ultra-High Dimensions

Distance weighted discrimination (DWD) is an appealing classification method that is capable of overcoming data piling problems in high-dimensional settings. Especially when various sparsity structures are assumed in these settings, variable selection in multicategory classification poses great challenges. In this paper, we propose a multicategory generalized DWD (MgDWD) method that maintains intrinsic variable group structures during selection using a sparse group lasso penalty. Theoretically, we derive minimizer uniqueness for the penalized MgDWD loss function and consistency properties for the proposed classifier. We further develop an efficient algorithm based on the proximal operator to solve the optimization problem. The performance of MgDWD is evaluated using finite sample simulations and miRNA data from an HIV study.     

基于石墨烯/石墨烯卷轴复合薄膜高灵敏度柔性压力传感器

一维导电材料例如纳米线，大量应用于柔性压力传感器中. 但是一维材料和基底之间接触时相互作用力较弱，使得传感器灵敏度、响应时间、和循环寿命等性能指标有待进一步提高. 针对这些问题，设计了石墨烯/石墨烯卷轴多分子层复合薄膜作为传感器导电层. 石墨烯卷轴具有一维结构，而石墨烯的二维结构可以牢固地固定卷轴，以确保高导电性复合薄膜与基底之间的粘附性，同时整体结构的导电通道得到了增加. 由于一维和二维结构的协同效应，实现了应变灵敏度系数3.5 kPa^-1、 响应时间小于50 ms、能够稳定工作1000次以上的压阻传感器.